self-curing waterproofing tape

Self-fixing waterproof protection material (waterproof sticker) is an insulating waterproof package, mainly with excellent insulation and waterproof performance characteristics, can be used for 35kV and below the cable, fiber optic cable, overhead lines and bare metal wires and other insulation protection, but also can be used in the communications industry, such as outdoor base station connectors, alien antennae, splitters, couplers, towers, GPS, all-in-one cabinets and other equipment waterproof protection.

Width: 40-80mm
Thickness: 1.8mm can be customized
Length: 50-1000m
Color: black, gray, yellow, red and other colors available

self-curing waterproofing tape Description:

Cured by water vapor in the air;
Simple installation, no need for special training and special tools, easier to work at height;
Low-temperature non-hardening, high-temperature non-flowing glue, all-weather construction, common in the south and north;
Outstanding UV aging resistance, reliable bonding;
The material is delicate and even, with excellent insulation performance;
Excellent bonding performance of the material, high waterproof performance.

self-curing waterproofing tape Features and Application:

Sealed insulation protection of overhead line clamps; local insulation reinforcement of overhead lines due to insufficient safety distances, etc.: .
Insulation protection for exposed metal of power conductors.
Used for local insulation repair of overhead wires and insulation repair of cable terminal accessories.
Used for insulation protection of exposed metal parts in switchgear cabinet.
Used for electric cabinet type cable for the entry hole at the blocking, especially in the outdoor use of 6.4G, 5G base station construction in the waterproofing of equipment, such as shaped antenna, splitter, tower defense, etc., and other related to electricity and waterproofing, such as high-speed rail, ships and other fields.

The construction of this product only need to be treated with the location of the waterproof stickers pinched and compacted, the material itself and the air after contact with the gradual curing, the formation of insulating waterproof layer. Simple operation, suitable for quick repair work, without heating or special tools on-site operation can be according to the actual situation of the waterproof sticker cutting and plastic.

self-curing waterproofing tape Model number data:

Curing time(20℃, 50% humidity)
Performance	Typical value (standard value)
Required use time after unpacking	30min
Shelf life	1 year/10 months
Sheet breakdown voltage up to 18kV time	3hrs
Fully cured	7 days
After curing
Hardness after full cure	50 Shore A
Tensile strength	1.75MPa
Elongation at break	370%/350%
Breakdown voltage (1.8mm sheet)	29.6kv
Breakdown voltage (1.8mm sheet wrapped on drop wire)	25.0kv
Volume resistivity	1.4100^15Ω.cm / 7100^14Ω.cm
Dielectric constant	3
Dielectric loss factor	0.26%
UV accelerated aging performance	No significant change in 2000 hours
Flame retardant grade	V1
Cold and thermal shock(-40℃--85℃)	No significant change in 200 cycles
Waterproof performance	The wire wrapped with waterproof sticker, after 12kv, 4 hours of water immersion voltage test, insulation does not breakdown
Waterproof voltage resistance test (20kV,4h)	Passed
Method of use The construction of this product only need to be treated with waterproof sticker location pinch compaction, the material itself and air contact gradually curing, the formation of insulating waterproof layer. Simple operation, suitable for rapid repair work, without heating or special tools on-site operation can be according to the actual situation of the waterproof sticker cutting and plastic.