Silicone Mara Tape

Mala tape, also known as mylar tape, uses mylar film as the substrate and acrylic acid barrier adhesive as the adhesive, which is highly resistant to chemicals, agents, and moisture. It can withstand cutting and abrasion and has the characteristics of resistance and insulation, and the colors are red, yellow, black, green, blue, white, and transparent.

Mala tapes are available in adhesive and non-adhesive versions. The adhesive tape uses a polymer film as the base layer, on which a layer of adhesive is applied. Adhesive tapes are made separately from imported tapes ("RonifxeH" and "HHTTO", etc.). Mara tape bases mostly withstand the chemical and mechanical effects of the surrounding medium on the insulation layer, with high electrical insulation performance and protection of the pipeline from corrosion of the truth palsy. "The sticky layer on the surface of the falling pescado film, in addition to the above-mentioned functions, can also promote the insulating layer to remain on the protected surface of the metal, resulting in the sealing of the lap between the layers of the Mala tape. On non-adhesive tapes (e.g. "IInaaxo small next"), a non-adhesive layer of a certain composition coated on the film base can act as the main protection in combination with a special primer coated on the pipe.

According to the physical properties of Mara tape, the surface of the pipe must be preheated before winding the tape. Poly-grade vinyl type, one is silicone rubber type. ji3TCAP-JIIIT tape is available in two types, namely }( A" type and scorching B) type, for corrosion protection of hot pipe sections with pipeline temperatures up to 120°C. This Mara tape consists of two layers (bearing layer and insulating layer), each with a different strength index.

• Mala tape is widely used in transformers, motors, capacitors, and other types of motors, electronic components of the insulation wrap, and switching power supply between the main board circuit and the shell of the high-voltage isolation. It is also used for the wrapping of soft-pack lithium batteries, such as wrapping between the protection board and the core, it plays a role in fixing and insulating the fire.

• Mala tape should be stored in the warehouse, avoid sun and rain; prohibited from contact with acid and alkali oil organic solvents, keep clean and dry, 1m away from the discovery device, room temperature between -15 ℃ ~ 40 ℃.
• Mala tape should be placed in volumes, not folded, and should be turned once a quarter when stored for too long. Anti-static warning floor Mala tape
• When loading and unloading the conveyor belt, it is best to use a crane and use the rigging with a beam to lift smoothly to avoid damage to the edge of the tape, do not load and unload brutally, causing loose rolls to throw off the set.
• The type and specification of the Mara tape should be selected reasonably according to the user's needs and specific conditions.
• Do not use different varieties, different specifications, strengths, and layers of the Mala tape connected (grouping) together.
• It is best to use hot vulcanized glue for the belt joint to improve reliability and maintain high effective strength.