Silicone Rubber Self-Adhesive Tape

Silicone rubber self-adhesive tape with silicone rubber as the substrate, adding self-adhesive special heat-resistant resins, processed by a special process. It has good elasticity, high expansion and contraction, good packing tightness and good heat resistance and cold resistance, and still has good dielectric properties in different environments, and also has the advantages of good arc resistance, high thermal conductivity, and good heat dissipation, so it is an ideal sealing material suitable for use in different conditions.
Standard colors: white, red, yellow, green, blue.
Common specifications: 25mm*0.8mm*5m / 50mm*0.5mm*5m / 50mm*0.8mm*5m

Silicone Rubber Self-Adhesive Tape Features:

Good conformability to irregular surfaces, convenient and quick construction;
Excellent weather resistance, ozone and ultraviolet resistance, excellent waterproof sealing performance;
Use temperature: -60 ℃ - +180 ℃, short time can be +260 ℃ under the use; room temperature within 12 hours of self-melt into one;
The product has been radiation crosslinking, good self-melting, with continuous high insulation;
Flame retardant, damping and vibration damping, anti-corona, anti-arc, anti-flashover;
Convenient maintenance: the material only bonds itself, and it is easy to peel off from the winding after scratching the product during maintenance.

Silicone Rubber Self-Adhesive Tape Application:

Insulation protection of charged bodies, cable joints, switchgear busbars and other high insulation requirements of the wrap .
For large generator sets, submersible motors and other H-class insulation protection, in the 180 ℃ high temperature still maintain high insulation performance;
Chemical metallurgy large pipeline, bridge steel frame for a long time rust, corrosion; automobile engine compartment pipeline repair;
Sporting goods, tool grip buffer protection, pipeline emergency repair;
Insulation protection reduces the safety distance of electrical appliances, prevents wind swing, prevents short circuits caused by foreign objects lap, and meets the electric power insulation design;
Mining, oilfield, chemical and other places where open flames can not be used for electric power system insulation protection;
Communication antenna feeder joint waterproofing;
For waterproofing roll-roofing lap sealing, municipal engineering sealing waterproofing treatment, plate joints airtight, waterproofing, shock absorption.

Silicone Rubber Self-Adhesive Tape Model number data:

Properties	Indicator	Test Methods/Conditions
Tensile strength	≥5.0MPa	ASTM D412
Rupture elongation	≥300%	ASTM D412
Breakdown strength	20kv/mm	ASTM D 149
Self-adhesive strength	6.3N/cm	ASTM D412
Water resistance	720hr no loosening, no water between layers	Immersion in 25 degree water
Water absorption	≤0.35%	ASTM D570
Flame retardant grade	Classification: Non-flame retardant and flame retardant V1,V0 grade	UL94
Volume resistivity	≥2.0x102.cm	ASTM D876
Heat resistance (100℃ 168h)	No cracking, no bubbles	GB/T7141
Method of use 1.Peel off the village layer and protective film, clean the protected parts; 2,Stretch 200%, lap 50% winding, pressing while winding; 3.Self-melt into one in 12 hours at room temperature.